Polyurea AL 1070 (Aliphatic)

Akfix Polyurea AL 1070 is a %100 solid, fast curing, 2 component, UV resistive, aliphatic pure polyurea system. Its formulation is designed for maintaining high color stability and preventing discoloration where surfaces are exposed to sun light continuously. While it can be directly used on most surfaces, it also can be used as a top layer on epoxy, polyurethane and polyurea. After fully cured, it forms a coating material with high tensile strength and abrasion resistance. For protection and coating purposes, it can be applied on concrete, metal, wood, ceramic and PU foam. It can form strong films in wide variety of thicknesses. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.

Властивості

Excellent resistance to UV light
%100 color stability
Fast reactivity and fast return to service time
%100 solid, VOC free, no odor
Very good tensile and structural strength
Anticorrosive
High Hydrolysis resistance
Excellent temperature stability
Seamless and joint-less coating with high water resistance
Excellent adhesion on concrete, steel, aluminum, plastics, wood, etc.
No sensitivity to temperature and humidity
Variable application thickness is possible
Broad color spectrum

Сфера застосування

At exterior coatings where color stability is required
Swimming pools and water parks
Roofs, garages and parking lots
Airports, shipyards and marina
Wind energy plants
Amusement parks and playgrounds
Decorative designs
Furniture industry

Упаковка

Складской код	Код продукта	Тип/цвет	Объем	Штук в ящике
WPAL1070.2005	POLYUREA AL1070	RAL 7040	410 kg set (210+200kg)	1
WPAL1070.2009	POLYUREA AL1070	RAL 5012	410 kg set (210+200kg)	1
WPAL1070.2010	POLYUREA AL1070	RAL 3000	410 kg set (210+200kg)	1

Галерея